First, the plane printing:

1, before printing, please remove the synthetic paper external packaging materials.

2, the use of general paper lithographic printing ink can be, do not have to use synthetic paper special ink.

3, synthetic paper printing speed of up to 8,000 per hour or more.

4, pay attention to Feida and received the paper static eliminator function to be normal use.

5, plate to PS version can be.

6, the use of wet water:

Use a 13% ± 2% alcohol moisturizing system, or add other volatile additions to moisturized water.
Because PP synthetic paper does not absorb water, so the water on the layout can be minimized.

It is recommended that the PH value of the moist water is maintained at about 5.5 to 6.0 and the temperature is maintained at about 9 to 15 ° C.

7, please use the fine powder, the amount of powder and the equivalent of the equivalent of copper can be (visual printing conditions and printing plate situation increase or decrease).

8, the collection of paper on the synthetic paper height recommended within 15cm, but according to the thickness of paper and overprint situation, depending on the situation increase or decrease.

9, printed paper pile do not hit, so that it can be maintained until the ink drying.

10, drying time:

To continue printing as the standard: 3 to 5 hours.
In order to be able to cut, processing or transportation prevail: depending on the complete dry condition is about 12 hours to 24 hours.

Second, the order:

1, synthetic paper with the direction of the wire to the tear is more obvious, before printing, please confirm the required synthetic paper wire and mark.

2, synthetic paper can be suitable for three fold "wireless plastic operation", which three fold please use a broken thread to increase the flatness of the flattened.

3, the book must be binding with the silk to the vertical, to ensure that when the page is good.

4, wireless plastic installed thickness of 0.10 ~ 0.15mm the most appropriate, suitable for general SHOEI (Japan) or STAHL (Germany) origami machine.

5, synthetic paper marked specifications such as: 0.12cmX790mmX550mm, of which 0.12mm on behalf of the thickness, 790mm on behalf of the width, 550mm on behalf of the length of the wire refers to the direction parallel to the length, the mark that silk to "↑".

6, the use of three fold "threading equipment" or "saddle nail operation" binding, the third fold can not be used off the knife, and recommended with a pressure wheel (PRESSROLLERS) STAHL origami machine, the fold available More flat effect, such as supplemented by hydraulic flattening device, the effect is better.